6 Best Elevated Model Train Track Options for Layouts (2026)
Compare 6 elevated model train track options, from FasTrack trestles to Kato Unitrack loops. Key specs, pros, cons and who each one suits.
Updated November 2026
An elevated model train track lets you run a second level above your main line, add a bridge over a river or a grade climb without eating table space. Choosing one means weighing track gauge compatibility, whether the supports are sturdy enough for your locomotives, how easily the pieces connect to the rest of your track plan, and how much height you need. The six options below were compared on the basis of manufacturer specifications, brand reputation within the model railroading community and patterns that owners commonly report, from O gauge trestle kits to N gauge elevated loops and plastic riser blocks.
Our top picks at a glance
- 1
TOP CHOICEBest overallLionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle SetView on Amazon - 2
TOP CHOICEBest for graduated gradesLionel FasTrack Graduated O Gauge Train Trestle SetView on Amazon - 3
TOP CHOICEBest budget pick6-Piece Light Grey Train Bridge, Plastic Track Support RisersView on Amazon - 4
Best for N gauge layoutsKato USA Model Train Products N V13 UNITRACK Double Track Elevated Loop SetView on Amazon - 5
Best for adding straight sectionsLionel O Gauge FasTrack 10 Inch Straight Four Piece Track PackView on Amazon - 6
Best for curved helix runsLionel Ready-to-Play 12-Piece Curved Model Train Track Pack, BlackView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set | O gauge layouts needing a complete elevated section | Ten-piece trestle kit matched to FasTrack |
| Lionel FasTrack Graduated O Gauge Train Trestle Set | Layouts with stepped height changes | Graduated trestle heights |
| 6-Piece Light Grey Train Bridge Plastic Track Support Risers | Budget-minded builders | Reusable plastic bridge blocks |
| Kato USA N V13 UNITRACK Double Track Elevated Loop Set | N gauge elevated loops | Double-track elevated loop |
| Lionel O Gauge FasTrack 10 Inch Straight Four Piece Track Pack | Extending an existing O gauge run | Four 10-inch straight sections |
| Lionel Ready-to-Play 12-Piece Curved Model Train Track Pack, Black | Curved helix and loop builds | Twelve curved pieces in one pack |
Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set
Best for: O gauge layouts that need a complete elevated section with a matched support system.
This is a good fit for builders already running Lionel O gauge equipment who want a bridge or raised mainline without building their own supports from scratch.
Key specs
- Scale: O gauge
- Piece count: 10 trestle pieces, as stated in the listing name
- Designed to work with Lionel FasTrack
Pros
- Designed for the same track system, so connections line up without adapters
- Gives a complete elevated run in one kit
- Easy to add to an existing FasTrack plan
Cons
- Limited to O gauge and FasTrack compatibility
- Heights are fixed by the kit, so custom grades need extra planning
Bottom line: The most direct choice for an O gauge builder who wants an elevated section that matches the rest of the track.
View on AmazonLionel FasTrack Graduated O Gauge Train Trestle Set
Best for: Layouts that need stepped height changes rather than a single flat elevated level.
Suited to builders who want the track to climb gradually, for example from a lower yard up to a raised main line.
Key specs
- Scale: O gauge
- Graduated trestle design for stepped elevation
- Built for FasTrack compatibility
Pros
- Stepped heights help achieve a gradual grade
- Matches the FasTrack system
- Useful for transitions between levels
Cons
- Works best when the layout is planned around its step heights
- Limited to O gauge
Bottom line: A strong choice for O gauge builders who need a graduated climb rather than a flat bridge.
View on Amazon6-Piece Light Grey Train Bridge, Plastic Track Support Risers
6-Piece Light Grey Train Bridge , Plastic Track Support Risers | Support elevated wooden toy train tracks and model railway layouts with reusable bridge blocks for upper-level routes
Best for: Budget-minded builders and anyone supporting wooden or lightweight elevated track.
These reusable plastic blocks suit layouts where a full trestle system isn’t necessary and where the track is supported at a few points rather than along its whole length.
Key specs
- Piece count: 6, as stated in the listing name
- Material: plastic risers
- Intended for elevated wooden toy train track and model railway layouts
Pros
- Reusable and easy to reposition
- Simple way to add height without building custom supports
- Lightweight and easy to store
Cons
- Not a complete trestle system, so you will need to plan support points
- Stability depends on how well the track is secured
Bottom line: A practical, low-commitment option for adding a raised section to a simple layout.
View on AmazonKato USA Model Train Products N V13 UNITRACK Double Track Elevated Loop Set
Best for: N gauge layouts that need an elevated loop with two tracks.
Ideal for N scale builders who want a double-track elevated loop from a single manufacturer’s track system.
Key specs
- Scale: N gauge
- Track system: Kato Unitrack
- Configuration: double-track elevated loop
Pros
- Kato Unitrack is widely used and integrates with other Unitrack pieces
- Double-track layout supports passing or staging
- Compact footprint suits N scale tables
Cons
- Limited to N gauge and Unitrack compatibility
- Fixed loop geometry limits custom layouts
Bottom line: The right pick for an N gauge builder who wants an elevated double-track loop out of the box.
View on AmazonLionel O Gauge FasTrack 10 Inch Straight Four Piece Track Pack
Best for: Extending an existing O gauge run or adding straight sections to an elevated route.
Useful for builders who already have FasTrack and need additional straight pieces to lengthen or connect elevated sections.
Key specs
- Scale: O gauge
- Piece count: four, as stated in the listing name
- Length per piece: 10 inches, as stated in the listing name
Pros
- Standard length makes layout planning straightforward
- Works with the FasTrack system
- Good for filling gaps in an existing run
Cons
- Straight pieces alone do not provide support, so trestles or risers are still needed
- Limited to O gauge
Bottom line: A useful add-on for O gauge builders extending an elevated route rather than a starting kit.
View on AmazonLionel Ready-to-Play 12-Piece Curved Model Train Track Pack, Black
Best for: Curved helix runs and loops that climb to an upper level.
Suited to builders who want to create a curved climb or loop, with the track gradually gaining height.
Key specs
- Piece count: 12 curved pieces, as stated in the listing name
- Finish: black
- Ready-to-play design
Pros
- Twelve curved pieces in one pack simplifies a loop build
- Good for helix and spiral designs
- Ready-to-play format
Cons
- Curves alone do not provide elevation, so supports are required
- Owners who mix track brands may need adapters
Bottom line: A good match for builders designing a curved helix or loop that climbs to an upper level.
View on AmazonBuying Guide
Match the track gauge to your locomotives
Elevated track is only useful if it matches your scale. O gauge, HO and N gauge track systems are not interchangeable, and mixing brands can cause alignment problems at joints. Check your existing track before buying elevated sections. The Model Train Track Gauges Chart: Scales, Sizes and How to Pick One article explains the common gauge sizes in detail.
Good picks for this: Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set, Kato USA N V13 UNITRACK Double Track Elevated Loop Set
Decide between a trestle, a riser and a fixed structure
Trestles provide a complete support system matched to the track. Plastic risers add height at specific points and are easier to reposition. Plan where the supports will go before you buy, since the number of pieces you need depends on the length of the elevated run.
Good picks for this: 6-Piece Light Grey Train Bridge Plastic Track Support Risers, Lionel FasTrack Graduated O Gauge Train Trestle Set
Check the grade and height you need
A steep grade can strain locomotives, especially those pulling long consists. Many builders keep grades gentle and plan transitions over a longer run. Measure the height difference between levels and work out how many pieces will be needed to climb it gradually. The Model Train Track Planner: How to Design a Layout Before You Buy Track article covers this planning step.
Good picks for this: Lionel FasTrack Graduated O Gauge Train Trestle Set, Lionel Ready-to-Play 12-Piece Curved Model Train Track Pack, Black
Plan the footprint and the curve radius
Curves on elevated track need enough radius for your longest locomotives and cars. Tight curves can cause derailments, particularly on a raised section where there is no room for error. Sketch the route on paper first and confirm the curve radius against your rolling stock’s specifications.
Good picks for this: Lionel Ready-to-Play 12-Piece Curved Model Train Track Pack, Black, Kato USA N V13 UNITRACK Double Track Elevated Loop Set
Consider stability and durability
Elevated track carries more stress than track at table level. Supports should be firmly attached to the base or benchwork, and joints should be checked regularly for alignment. Plastic risers are lightweight and reusable, while larger trestle systems tend to feel more solid once assembled.
Good picks for this: Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set, 6-Piece Light Grey Train Bridge Plastic Track Support Risers
Think about how you will expand the layout
Most builders add to a layout over time. Choosing elevated track within a single track system makes future expansion simpler, since new pieces will connect without adapters. Straight add-on packs are useful for extending a run as your plans grow.
Good picks for this: Lionel O Gauge FasTrack 10 Inch Straight Four Piece Track Pack, Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set
Plan for maintenance and access
Elevated sections can be harder to reach for cleaning and derailment recovery. Leave enough clearance above and below the track to reach it, and keep the elevated route within arm’s length where possible. Regular cleaning of the rails helps reliability on every level.
Good picks for this: 6-Piece Light Grey Train Bridge Plastic Track Support Risers, Kato USA N V13 UNITRACK Double Track Elevated Loop Set
FAQ
What is an elevated model train track?
An elevated model train track is a section of track raised above the main layout level on supports such as trestles, risers or bridge structures. It lets you add a second level, a bridge or a grade without taking up extra table space.
Do I need the same brand of track for elevated sections?
Not always, but matching brand and track system is the safest choice. Track from different manufacturers can have different rail heights and joiner designs, which can cause misalignment and derailments at the joints.
How steep can an elevated grade be?
Grades should be kept gentle to protect locomotives and avoid stalling, especially with heavy trains. Manufacturers and experienced builders commonly recommend planning a gradual climb over a longer run rather than a steep rise over a short distance.
Can I use plastic risers instead of a trestle set?
Yes, for simple layouts with a few raised points. Risers are reusable and lower-commitment, but they require careful planning of support points and secure fastening to keep the track stable.
What curve radius should I use on elevated track?
Check the minimum radius specified for your locomotives and rolling stock, then choose curved pieces that meet or exceed it. Tight curves are more likely to cause derailments on a raised section.
How do I keep elevated track reliable over time?
Check joints for alignment, keep the rails clean and make sure supports are firmly fixed. Periodic inspection after heavy running sessions helps catch loose sections before they cause problems.
Conclusion
For O gauge builders who want a complete elevated section, the Lionel FasTrack 10-Piece Elevated O Gauge Model Train Trestle Set is the most direct match, while the Graduated trestle set suits layouts that need stepped heights. Budget builders with simple layouts may prefer the 6-piece plastic risers. N gauge builders should look at the Kato Unitrack double-track loop, and those extending an existing run will find the straight four-piece pack useful. The curved pack suits helix and loop designs. Match the track system to your existing equipment first, then choose the support style that fits your grade and layout plan.
Sources
- Standards and recommended practices for model railroad track gauges and clearances
- Background on railway engineering, grades and track construction
