Hershey HO Scale Train Set: A Step-by-Step Guide for Beginners
Learn how to choose, unpack, set up and run a Hershey HO scale train set, with track layout, power and first-run tips for beginners.
Updated November 2026
A hershey ho scale train set is a good way to start model railroading in the 1:87 scale, and this guide walks you through what to check when you buy one, how to unpack and set it up, and how to get your first trains running reliably. By the end, you will have a working oval, a basic power supply connected, and a short list of checks to keep the trains running smoothly.
Know What You Are Getting Before You Unbox
HO scale is roughly 1:87, meaning a model is about 1/87 the size of the real thing. Before you open the box, confirm which items are included: the locomotive, the cars, the track sections, the power pack, and any couplers or extra parts. Compare the contents to the included inventory list. If something is missing, contact the seller or manufacturer before you start, since replacement parts can be hard to find for older sets.
Shopping for one? See our guide: 6 Best HO Scale Christmas Train Sets for Holiday Displays (2026).
For a broader look at scale terms and what HO means in practice, see What Does HO Scale Train Set Mean? Size, Ratio and Buying Tips.
Lay Out the Track and Connect Power
Most starter sets use snap-together track sections, usually in a loop or oval. Work on a flat surface, such as a table or a sheet of plywood, and connect the sections one at a time, making sure each joint clicks fully. A loose joint is the most common reason a locomotive stalls or derails.
- Lay out the track in its intended oval, then check that all sections face the same direction.
- Press each joiner firmly and confirm there are no gaps or uneven rails.
- Connect the power pack to the track terminals, matching the red and black leads to the correct posts.
- Set the throttle to zero before turning on the power.
- Place the locomotive on the track, check the wheels sit on both rails, then raise the throttle slowly.
If you plan to expand the layout later, Ho Scale Train Track Set: How to Choose and Build a Reliable HO Layout (2026) covers track geometry and planning.
Test Each Car and Locomotive
Run the locomotive at a low speed in both directions. Watch for wheels that bind, couplers that release unexpectedly, and cars that jump the track on curves. Many starter sets use tight radius curves, which some longer cars and locomotives cannot negotiate. If a car derails only on a curve, that is usually a geometry or coupler issue rather than a fault in the model itself.
Cleaning the rails with a non-abrasive track-cleaning pad often fixes intermittent running, especially on a set that has sat in storage.
Check Power and Wiring
If the locomotive runs in one direction but not the other, or stops at certain spots, check the track joints and the power connections first. Loose terminal screws and dirty rail joints cause most of the problems beginners report.
Plan Your First Operating Session
Once everything runs, set a simple routine: a short run at low speed, a check for derailments, and a stop at a sidings or station if your set includes one. Keeping sessions short makes it easier to spot problems before they become frustrating. Store the set on a stable surface, away from direct sunlight and dust, so the track stays clean between sessions.
Common Mistakes
- Raising the throttle too quickly, which can cause derailments and motor strain.
- Mixing track sections from different brands, which may not align cleanly.
- Running cars with unbalanced loads at high speed on curves.
- Skipping the track-cleaning step and blaming the locomotive.
- Forcing sections together instead of checking the joint alignment.
Recommended Gear
- Track-cleaning pads: Help restore electrical contact on rails that have collected dust or oxidation. View on Amazon
- Small screwdriver set: Useful for tightening terminal screws and adjusting couplers. View on Amazon
FAQ
Is a Hershey HO scale train set suitable for young children?
Many starter sets are designed for beginners of all ages, but small parts can be a choking hazard for children under three. Supervise younger users and check the manufacturer’s age recommendation on the packaging.
Can I add more cars to my set later?
Yes, but check that the new cars use the same couplers and wheel standards as your existing set. Mixing couplers can cause cars to uncouple on curves.
Why does my locomotive stop on one section of track?
The most likely causes are a loose or misaligned track joint or a dirty rail. Clean that section and press the joints firmly before testing again.
Conclusion
A hershey ho scale train set rewards careful setup. Check the contents, connect the track and power methodically, and test every car before you add scenery or expand the layout. A clean, well-joined oval and a patient first session will give you a reliable base for everything that comes next.
Related reading
- Tyco Train Set HO Scale: A Step-by-Step Guide for Beginners
- Tyco Ho Scale Electric Train Set: A Step-by-Step Setup Guide (2026)
- Progress Rail HO Scale Train Set Review: Is It Worth It?
- Progress Rail HO Scale Train Set CAT: A Step-by-Step Guide for Beginners
Ready to choose one?
